2410FA-1.5A
Fast Acting
SMD 125VAC/DC Fuse
Descriptions
2410FA Series SMD fuse for the small size and good electrical performance, reliability and quality.
Electrical Characteristics
| CurrentRating | % of Ampere Rating | Opening Time |
|---|---|---|
| 500mA-15A | 100% | 4 hours Min |
| 500mA-15A | 200% | 4 hours Min |
Features
- Designed to UL 248-14 Small size
- Compatible with reflow and wave soldering RoHS
- Compliant and Halogen Free
- One time positive disconnect
Application
- Notebook PC
- Backlight inverter
- Power supply
- Storage system
- Telecom system
- Battery charging circuit protection
- Industrial equipment
Specification
| Product Code |
Current Rating |
Voltage Rating |
Interrupting Rating |
Resistance (ohms) Typ. |
Typical Melting I2t(A2Sec) |
Typical Voltage Drop(mV) |
|---|---|---|---|---|---|---|
| 2410FA-R500 | 0.5A | 125VAC 125VDC |
125VAC@50A 125VDC@50A |
0.28100 | 0.48 | 185 |
| 2410FA-R800 | 0.8A | 0.13700 | 1.70 | 150 | ||
| 2410FA-1A | 1.0A | 0.10500 | 2.70 | 140 | ||
| 2410FA-1.5A | 1.5A | 0.06200 | 4.90 | 125 | ||
| 2410FA-2A | 2.0A | 0.02700 | 1.50 | 96 | ||
| 2410FA-2.5A | 2.5A | 0.01820 | 5.50 | 60 | ||
| 2410FA-3A | 3.0A | 0.01780 | 3.10 | 86 | ||
| 2410FA-4A | 4.0A | 0.01290 | 5.20 | 85 | ||
| 2410FA-5A | 5.0A | 0.01020 | 8.50 | 81 | ||
| 2410FA-6.3A | 6.3A | 0.00770 | 15.0 | 80 | ||
| 2410FA-7A | 7.0A | 0.00720 | 19.5 | 80 | ||
| 2410FA-8A | 8.0A | 0.00630 | 24.0 | 78 | ||
| 2410FA-10A | 10A | 0.00510 | 38.0 | 77 | ||
| 2410FA-12A | 12A | 0.00395 | 57.0 | 76 | ||
| 2410FA-15A | 15A | 0.00315 | 105.0 | 75 |
- AC Interrupting Rating (measured at designated voltage, 100% power factor); DC Interrupting Rating (measured at designated voltage, time constant of less than 50 microseconds, battery source)
- DC Cold Resistance are measured at <10% of rated current in the ambient temperature of 25℃
- Typical Pre-arcing I2 t are measured at 10In Current
Dimension
Packaging
- Quantity: 1, 000pcs
- 12mm wide tape on 178mm(7 inch) diameter reel -specification EIA Standard 481.
Soldering Parameters
Wave Soldering: 260°C, 10 seconds max.
Infrared Reflow: 260°C, 30 seconds max.
IR Reflow Profile
| Preheat Heat | |
|---|---|
| Temperature Min (Tsmin) | 150°C |
| Temperature Max (Tsmax) | 200°C |
| Time (Tsmin to Tsmax), ts | 60 – 120 seconds |
| Average Ramp-up Rate (Tsmax to Tp) | 3°C/second max. |
| Liquidous Temperature (TL) | 217°C |
| Time at Liquidous (tL) | 60 – 150 seconds |
| Peak Temperature (Tp) | 260+0/-5°C |
| Time within 5°C of Peak (tp) | 10 – 30 seconds |
| Average Ramp-down Rate (Tp to Tsmax) | 6°C/second max. |
| Total Time (25°C to Peak) | 8 minutes max. |
Temperature Derating Curve
- Normal Operating Temperature: 25℃± 2℃
- Operating Temperature: -55℃ to 125℃ with proper correction factor applied. Chart of correction factor
Storage Temperature: -55℃ to 125℃
Time Current Curves
