0603FA-2A
Fast Acting | 0.063x0.032 inch
Thick Film Chip Fuses
0603FA Series are the fuses set the industry standard for performance, reliability and quality. The solder-free design provides excellent on-off and temperature cycling characteristics during use and also makes our SMD fuses more heat and shock tolerant than typical subminiature fuses.
Features
- AEC-Q200 Automotive Grade Certified
- Compatible with reflow and wave solder
- Excellent environmental integrity
- One time positive disconnect
- Lead Free and Halogen free materia
Appications
- Flat panel displays and televisions
- Automotive infotainment and ECU
- Computer servers
- Portable electronics
- Mobile device chargers
Electrical Characteristics
| Amp Rating (A) | % of Amp Rating | Opening Time |
|---|---|---|
| 0.25 ~ 8A | 100% | 4 hours min |
| 0.25 ~ 8A | 200% | 60 seconds max |
Specifications
| Part Number | Amp Rating (A) | Voltage Rating (V) | Interrupting Rating | Typical Cold Resistance (Ω) | Typical Melting I²t (A²s) | Typical Voltage Drop (V) | Marking Code |
|---|---|---|---|---|---|---|---|
| 0603FA-R250 | 0.250 | 32 | 32V @ 50A | 3.250 | 0.00042 | 0.893 | D |
| 0603FA-R375 | 0.375 | 32 | 32V @ 50A | 1.800 | 0.00093 | 0.587 | E |
| 0603FA-R500 | 0.500 | 32 | 32V @ 50A | 1.070 | 0.00100 | 0.582 | F |
| 0603FA-R750 | 0.750 | 32 | 32V @ 50A | 0.470 | 0.00900 | 0.427 | G |
| 0603FA-1A | 1.00 | 32 | 32V @ 50A | 0.250 | 0.01100 | 0.335 | B |
| 0603FA-1.5A | 1.50 | 32 | 32V @ 50A | 0.150 | 0.04500 | 0.270 | H |
| 0603FA-2A | 2.00 | 32 | 32V @ 50A | 0.078 | 0.11500 | 0.160 | K |
| 0603FA-2.5A | 2.50 | 32 | 32V @ 50A | 0.049 | 0.14000 | 0.145 | L |
| 0603FA-3A | 3.00 | 32 | 32V @ 50A | 0.035 | 0.21000 | 0.130 | O |
| 0603FA-3.5A | 3.50 | 32 | 32V @ 50A | 0.028 | 0.50000 | 0.130 | R |
| 0603FA-4A | 4.00 | 32 | 32V @ 50A | 0.018 | 0.56000 | 0.120 | S |
| 0603FA-5A | 5.00 | 32 | 32V @ 50A | 0.014 | 1.20000 | 0.110 | T |
| 0603FA-6A | 6.00 | 32 | 32V @ 50A | 0.011 | 1.70000 | 0.110 | V** |
| 0603FA-7A | 7.00 | 32 | 32V @ 50A | 0.0095 | 2.30000 | 0.080 | X** |
| 0603FA-8A | 8.00 | 32 | 32V @ 50A | 0.0070 | 3.00000 | 0.075 | Z** |
- DC Interrupting Rating (Measured at rated voltage, time constant of less than 50 microseconds, battery source)
- DC Cold Resistance are measured at <10% of rated current in ambient temperature of 25degrees
- Typical Pre-arcing I2 t are measured at 10In Current ** For 1A-5A, the color of glass coating is Green; for others, it’s Blue.Specifications are subject to change without notice. Application testing is strongly recommended.
Dimension
Unit: mm/inch
Pad layout
Packaging
- Quantity: 5 000pcs
- 8mm wide tape on 178mm(7 inch) diameter reel -specification EIA Standard 481.
Soldering Parameters
Wave Soldering: 260°C, 10 seconds max.
Infrared Reflow: 260°C, 30 seconds max.
IR Reflow Profile
| Preheat Heat | |
|---|---|
| Temperature min (Tsmin) | 150°C |
| Temperature max(Tsmax) | 200°C |
| Time (Tsmin to Tsmax) (ts) | 60 -120 seconds |
| Average ramp-up rate(Tsmax to Tp) | 3°C/second max. |
| Liquidous temperature (TL) | 217°C |
| Time at liquidous(tL) | 60 -150 seconds |
| Peak temperature(Tp) | 260+0/-5°C |
| Time within 5°C of actual peak Temperature (tp) | 10-30 seconds |
| Average ramp-down rate (Tp to Tsmax) | 6°C/second max. |
| Time 25 °C to peak temperature | 8 minutes max. |
Temperature Derating Curve
- Normal ambient temperature: 23+/-3℃
- Operating temperature: -55 ~ 150℃, with proper correction factor applied
Average Time Current Curves
