1206FA-2.5A
Fast Acting | 0.126x0.064 inch
Thick Film Chip Fuses
1206FA Series are the fuses set the industry standard for performance, reliability and quality. The solder-free design provides excellent on-off and temperature cycling characteristics during use and also makes our SMD fuses more heat and shock tolerant than typical subminiature fuses.
Features
- AEC-Q200 Automotive Grade Certified
- Rapid interruption of excessive current
- Compatible with reflow and wave solder
- Ceramic and glass construction
- One time positive disconnect
- Lead Free and Halogen free material
Appications
- Flat panel displays and televisions
- Automotive infotainment and ECU
- Computer servers
- Portable electronics
- Mobile device chargers
- Power Battery Packs
Electrical Characteristics
| Amp Rating | % of Amp Rating | Opening Time |
|---|---|---|
| 0.25–40A | 100% | 4 hours min. |
| 0.25–5A | 250% | 5 seconds max. |
| 6–40A | 350% | 5 seconds max. |
Specification
| Part Number | Amp Rating (A) | Voltage Rating / Interrupting Rating | Typical Cold Resistance (Ω) | Typical Melting I²t (A²s) | Typical Voltage Drop (V) | Marking Code |
|---|---|---|---|---|---|---|
| 1206FA-R250 | 0.250 | 72Vdc @50A 63Vdc @50A 32Vdc @150A 24Vdc @300A |
3.608 | 0.0004 | 1.407 | .25 |
| 1206FA-R375 | 0.375 | 1.882 | 0.0008 | 0.718 | E | |
| 1206FA-R500 | 0.500 | 1.028 | 0.0022 | 0.650 | 0.5 | |
| 1206FA-R750 | 0.750 | 0.601 | 0.0057 | 0.616 | .75 | |
| 1206FA-1A | 1.00 | 0.490 | 0.100 | 0.510 | H | |
| 1206FA-1.5A | 1.50 | 0.240 | 0.150 | 0.367 | K | |
| 1206FA-2A | 2.00 | 0.132 | 0.385 | 0.316 | N | |
| 1206FA-2.5A | 2.50 | 0.077 | 0.650 | 0.240 | 0 | |
| 1206FA-3A | 3.00 | 0.048 | 1.150 | 0.187 | P | |
| 1206FA-3.5A | 3.50 | 0.040 | 1.630 | 0.180 | R | |
| 1206FA-4A | 4.00 | 0.035 | 1.730 | 0.173 | S | |
| 1206FA-4.5A | 4.50 | 32Vdc @150A 24Vdc @300A |
0.030 | 2.000 | 0.164 | X |
| 1206FA-5A | 5.00 | 0.025 | 2.890 | 0.141 | T | |
| 1206FA-6A | 6.00 | 0.0165 | 11.00 | 0.142 | F | |
| 1206FA-7A | 7.00 | 0.0120 | 12.50 | 0.140 | 7 | |
| 1206FA-8A | 8.00 | 32Vdc @150A 24Vdc @300A |
0.0085 | 14.00 | 0.110 | M |
| 1206FA-10A | 10.0 | 0.0068 | 20.00 | 0.100 | U | |
| 1206FA-12A | 12.0 | 0.0050 | 9.20 | 0.085 | 12 | |
| 1206FA-15A | 15.0 | 0.0039 | 14.00 | 0.078 | 15 | |
| 1206FA-20A | 20.0 | 0.0018 | 47.17 | 0.060 | 20 | |
| 1206FA-25A | 25.0 | 0.0015 | 32.00 | 0.057 | 25 | |
| 1206FA-30A | 30.0 | 0.00125 | 43.00 | 0.068 | 30 | |
| 1206FA-40A | 40.0 | 24Vdc @200A 32Vdc @200A |
0.00085 | 240.0 | 0.095 | XL |
- DC Interrupting Rating (Measured at rated voltage, time constant of less than 50 microseconds, battery source)
- DC Cold Resistance are measured at <10% of rated current in ambient temperature of 25℃
- Typical Pre-arcing I2 t are measured at 10In Current Specifications are subject to change without notice. Application testing is strongly recommended.
Dimension
Unit: mm/inch
Pad layout
Packaging
- Quantity: 3, 000pcs
- 8mm wide tape on 178mm(7 inch) diameter reel -specification EIA Standard 481.
Soldering Parameters
Wave Soldering: 260°C, 10 seconds max.
Infrared Reflow: 260°C, 30 seconds max.
IR Reflow Profile
| Preheat Heat | |
|---|---|
| Temperature Min (Tsmin) | 150°C |
| Temperature Max (Tsmax) | 200°C |
| Time (Tsmin to Tsmax), ts | 60 – 120 seconds |
| Average Ramp-up Rate (Tsmax to Tp) | 3°C/second max. |
| Liquidous Temperature (TL) | 217°C |
| Time at Liquidous (tL) | 60 – 150 seconds |
| Peak Temperature (Tp) | 260+0/-5°C |
| Time within 5°C of Peak (tp) | 10 – 30 seconds |
| Average Ramp-down Rate (Tp to Tsmax) | 6°C/second max. |
| Total Time (25°C to Peak) | 8 minutes max. |
Temperature Derating Curve
- Normal ambient temperature: 23+/-3℃
- Operating temperature: -55 ~ 150℃, with proper correction factor applied
Average Time Current Curves
