1206TD-4.5AS

Products Specifications

Features
AEC-Q200, High Inrush Current Withstand Capability, High I²t Capability, Ceramic or Glass Construction, One-Time Circuit Disconnection
Breaking Capacity @ Rated Voltage
50 A @ 72 VDC
Mounting Type
Surface Mount
Operating Temperature
-55 ~ 150 ℃
Voltage Rating
72 VDC
Ampere Rating
4.5 A
Typical Cold Resistance
27 Ohms
Typical Melting I ²t (A² Sec)
2.65
Size / Dimension
0.126 in x 0.064 in
Package / Case
1206 (3216 Metric)
Response Time
Time Delay / Slow blow

Time Delay | 0.126x0.064 inch

Thick Film Chip Fuses

1206TD Series are the fuses set the industry standard for performance, reliability and quality. The solder-free design provides excellent on-off and temperature cycling characteristics during use and also makes our SMD fuses more heat and shock tolerant than typical subminiature fuses.

Features

  • High inrush current withstanding capability
  • AEC-Q200 Automotive Grade Certified
  • Compatible with reflow and wave solder
  • Ceramic and glass construction
  • Excellent environmental integrity
  • One time positive disconnect
  • Lead Free and Halogen free material

Appications

  • Flat panel displays and televisions
  • Automotive infotainment and ECU
  • Computer servers
  • Portable electronics
  • Mobile device chargers
  • Power Battery Packs

1206TD-4.5AS

Electrical Characteristics

Rated Current % of Amp Rating Opening Time
4.5 ~ 40 A 100% 4 hours min.
4.5A ~ 5 A 250% 5 Seconds Max.
4.5A ~ 5 A 300% 0.1 sec ~ 3 sec
6 ~ 40 A 350% 5 Seconds Max.
4.5 ~ 40 A 1000% 0.2 ms – 20 ms

Specifications

Part Number Ampere Rating (A) Interrupting Rating / Voltage Rating Typical Cold Resistance (Ω) Typical Melting I²t (A²Sec) Typical Voltage Drop (V) Marking Code
1206TD-4.5AS 4.50 50 A @  72 Vdc
50 A @ 63 Vdc
50 A @ 32 Vdc
27 2.65 0.164 X
1206TD-5AS 5.00 22 4 0.145 T
1206TD-6AS 6.00 14.5 12 0.140 F
1206TD-7AS 7.00 10.5 14 0.130 7
1206TD-8AS 8.00 200 A @ 48 Vdc
200 A @ 36 Vdc
200 A @ 32 Vdc
7 16 0.123 V
1206TD-10AS 10.0 5 22 0.110 U
1206TD-12AS 12.0 4.3 40 0.080 W
1206TD-15AS 15.0 3.5 45 0.085 Y
1206TD-20AS 20.0 2.2 50 0.080 Q
1206TD-25AS 25.0 1.55 58 0.090 L
1206TD-30AS 30.0 1.32 95 0.090 Z
1206TD-40AS 40.0 200 A @ 36 Vdc
200 A @ 32 Vdc
0.85 240 0.095 XL
  • DC Interrupting Rating (Measured at rated voltage, time constant of less than 50 microseconds, battery source)
  • DC Cold Resistance are measured at <10% of rated current in ambient temperature of 25℃
  • Typical Pre-arcing I²t are measured at 10In Current.
  • Choice fuse for surge application (USB charger etc.), make sure the I²t of fuse is 4 times than surge.
  • Specifications are subject to change without notice. Application testing is strongly recommended

Dimension

Unit: mm/inch

1206TD-4.5AS

Pad layout

1206TD-4.5AS

Packaging

  • Quantity: 3 000pcs
  • 8mm wide tape on 178mm(7 inch) diameter reel -specification EIA Standard 481.

Soldering Parameters

1206TD-4.5AS

Wave Soldering: 260°C, 10 seconds max.

Infrared Reflow: 260°C, 30 seconds max.

IR Reflow Profile

Preheat Heat
Temperature Min (Tsmin) 150°C
Temperature Max (Tsmax) 200°C
Time (Tsmin to Tsmax), ts 60 – 120 seconds
Average Ramp-up Rate (Tsmax to Tp) 3°C/second max.
Liquidous Temperature (TL) 217°C
Time at Liquidous (tL) 60 – 150 seconds
Peak Temperature (Tp) 260 +0/-5°C
Time within 5°C of actual Peak Temperature (tp) 10 – 30 seconds
Average Ramp-down Rate (Tp to Tsmax) 6°C/second max.
Time 25°C to Peak temperature 8 minutes max.

Temperature Derating Curve

1206TD-4.5AS

  • Normal ambient temperature: 23+/-3℃
  • Operating temperature: -55 ~ 150℃, with proper correction factor applied

Average Time Current Curves

1206TD-4.5AS

 

PROSEMI TECHNOLOGY

SEND A MESSAGE

Feel free to fill out our contact form below and our support team will get back to you within 24 hours.