E10SD-200A-TA

Features

  • Fast Acting fuse for DC Application
  • Stud-mount, optional for other installation
  • Excellent DC performance
  • Design to UL248-1 & UL248-20
  • Comply RoHS directive

Specifications

Part Number Rated Current (A) Rated Voltage (Vdc) Breaking Capacity (A) Power Loss At 0.5In (W)
E10SD-150A-TA 150 1000 50000 4.5
E10SD-200A-TA 200 1000 50000 6.6
E10SD-250A-TA 250 1000 50000 8.5

Dimension (mm)

E10SD-200A-TA

Note: 12+/ -1Nm (M8)

Temperature Re-Rating Curve

E10SD-200A-TA

Operating Temperature: -40°C to +100°C, with proper rerating factor applied.

Time-Current Curve

E10SD-200A-TA

Transportation and Storage

During transportation and storage, should avoid water seepage and mechanical damage.

Conditions for operation in service

Where the following conditions apply, fuses complying with this standard are deemed capable of operating satisfactorily without further qualification;

Normal temperature: -5℃ to 40℃;

The altitude of the site of installation of the fuses does not exceed 2 000 m above sea level;

The air is clean and its relative humidity does not exceed 50 % at the maximum temperature of 40℃;

Higher relative humidities are permitted at lower temperatures, e.g. 90 % at 20℃;

Under these conditions, moderate condensation may occasionally occur due to variation in temperature.

For operation condition other than above, please contact manufacturer.

Vibration

Meet JASO D622:2006 Section 6.3.3 Vibration durability test requirement, can be use on Electrical Vehicle application.

PROSEMI TECHNOLOGY

SEND A MESSAGE

Feel free to fill out our contact form below and our support team will get back to you within 24 hours.