PG16-700

Radial Leaded | Round/Square size
Polymer Positive Temperature Coefficient Thermistor

Features

  • Low voltage over-current protection
  • Working current: 0.30A-14.0A
  • Impulse voltage: 16V
  • In line with RoHS certification, halogen-free product
  • Tinned copper clad steel wire(0.30~2.50A)/ Tinned Copper wire(3.00A~14.0A)

 

PG16-700

Electrical Performance

Product model IH
(A)
IT
(A)
Vmax
(V)
lmax (A) Max Time Trip Pd tby
(W) 
RMin
(Ω)
R1Max
(Ω)
(A) (S)
PG16-030 0.30 0.60 16 40 1.50 5.00 1.0 0.30 0.90
PG16-050 0.50 1.00 16 40 2.50 5.00 1.0 0.20 0.75
PG16-065 0.65 1.30 16 40 3.25 5.00 1.0 0.12 0.27
PG16-075 0.75 1.50 16 40 3.75 5.00 1.0 0.10 0.255
PG16-090 0.90 1.80 16 40 4.50 5.00 1.0 0.09 0.240
PG16-110 1.10 2.20 16 40 5.50 5.00 1.0 0.08 0.225
PG16-120 1.20 2.40 16 40 6.00 5.00 1.0 0.07 0.225
PG16-135 1.35 2.70 16 40 6.75 5.00 1.3 0.04 0.180
PG16-160 1.60 3.20 16 40 8.00 10.0 1.5 0.03 0.105
PG16-185 1.85 3.70 16 40 9.25 10.0 2.0 0.03 0.135
PG16-200 2.00 4.00 16 40 10.0 10.0 2.0 0.03 0.075
PG16-250 2.50 5.00 16 50 12.5 5.00 2.5 0.02 0.075
PG16-300 3.00 6.00 16 50 15.0 2.00 2.5 0.038 0.105
PG16-400 4.00 8.00 16 50 20.0 3.50 2.8 0.021 0.060
PG16-500 5.00 10.0 16 100 25.0 3.60 3.0 0.015 0.038
PG16-600 6.00 12.0 16 100 30.0 5.80 3.2 0.010 0.030
PG16-700 7.00 14.0 16 100 35.0 8.00 3.5 0.008 0.023
PG16-800 8.00 16.0 16 100 40.0 9.00 3.5 0.006 0.018
PG16-900 9.00 18.0 16 100 45.0 12.0 3.8 0.005 0.017
PG16-1000 10.0 20.0 16 100 50.0 12.5 4.0 0.004 0.014
PG16-1100 11.0 22.0 16 100 55.0 13.5 4.0 0.004 0.012
PG16-1200 12.0 24.0 16 100 60.0 16.0 4.2 0.004 0.011
PG16-1300 13.0 26.0 16 100 65.0 25.0 4.8 0.0035 0.009
PG16-1400 14.0 28.0 16 100 70.0 20.0 4.8 0.003 0.008

IH = Hold current: maximum current at which the device will not trip at 23℃ still air.
IT = Trip current: minimum current at which the device will always trip at 23℃ still air. Vmax = Maximum continuous voltage device can withstand without damage at rated current
Imax = Maximum fault current device can withstand without damage at rated voltage.

Ttrip = Maximum time to trip(s) at assigned current.
Pdtyp =Typical power dissipation: typical amount of power dissipated by the device when in state air environment.
Rmin = Minimum resistance of device in initial (un-soldered) state.
R1max = Maximum resistance of device at 23℃ measured one hour after reflow.

Noted: All electrical function test is conducted after PCB mounted.

Thermal Derating Chart

Hold Current (A)

Part Number Ambient Operating Temperature
-40°C -20°C 0°C 23°C 40°C 50°C 60°C 70°C 85°C
PG16-030 0.444 0.396 0.348 0.300 0.252 0.228 0.207 0.180 0.144
PG16-050 0.740 0.660 0.580 0.500 0.420 0.380 0.345 0.300 0.240
PG16-065 0.962 0.858 0.754 0.650 0.546 0.494 0.449 0.390 0.312
PG16-075 1.110 0.990 0.870 0.750 0.630 0.570 0.518 0.450 0.360
PG16-090 1.332 1.188 1.044 0.900 0.756 0.684 0.621 0.540 0.432
PG16-110 1.628 1.452 1.276 1.100 0.924 0.836 0.759 0.660 0.528
PG16-120 1.776 1.584 1.392 1.200 1.008 0.912 0.828 0.720 0.576
PG16-135 1.998 1.728 1.566 1.350 1.134 1.026 0.932 0.810 0.648
PG16-160 2.368 2.112 1.856 1.600 1.344 1.216 1.104 0.960 0.768
PG16-185 2.738 2.442 2.146 1.850 1.554 1.406 1.277 1.110 0.888
PG16-200 2.960 2.640 2.320 2.000 1.680 1.520 1.380 1.200 0.960
PG16-250 3.700 3.300 2.900 2.500 2.100 1.900 1.725 1.500 1.200
PG16-300 4.440 3.960 3.480 3.000 2.520 2.280 2.070 1.800 1.440
PG16-400 5.920 5.280 4.640 4.000 3.360 3.040 2.760 2.400 1.920
PG16-500 7.400 6.600 5.800 5.000 4.200 3.800 3.450 3.000 2.400
PG16-600 8.880 7.920 6.960 6.000 5.040 4.560 4.140 3.600 2.880
PG16-700 10.360 9.240 8.120 7.000 5.880 5.320 4.830 4.200 3.360
PG16-800 11.840 10.560 9.600 8.000 6.720 6.080 5.520 4.800 3.840
PG16-900 13.320 11.880 10.700 9.000 7.560 6.840 6.210 5.400 4.320
PG16-1000 14.800 13.200 12.000 10.000 8.400 7.600 6.900 6.000 4.800
PG16-1100 16.280 14.520 13.100 11.000 9.240 8.360 7.590 6.600 5.280
PG16-1200 17.760 15.840 14.400 12.000 10.080 9.120 8.280 7.200 5.760
PG16-1300 19.240 17.160 15.730 13.000 10.920 9.880 8.970 7.800 6.240
PG16-1400 20.720 18.480 16.800 14.000 11.760 10.640 9.660 8.400 6.720

Typical time to trip at 23˚C

A=PG16-030
B=PG16-050
C=PG16-065
D=PG16-075
E=PG16-090
F=PG16-110
G=PG16-120
H=PG16-13
I=PG16-160
J=PG16-185
K=PG16-200
L=PG16-250
M=PG16-300
N=PG16-400
O=PG16-500
P=PG16-600
Q=PG16-700
R=PG16-800
S=PG16-900
T=PG16-1000
U=PG16-1100
V=PG16-1200
W=PG16-1300
X=PG16-1400

PG16-700

Size(mm)

PG16-700

PG16-700

PG16-700

Product
model
A B C D E F Lead FIG Package
QTY
max max typ min max typ Φ
PG16-030 7.40 13.00 5.10 7.60 3.00 0.80 0.50 1 1000PCS
PG16-050 7.40 13.00 5.10 7.60 3.00 0.80 0.50 1 1000PCS
PG16-065 7.40 13.00 5.10 7.60 3.00 0.80 0.50 1 1000PCS
PG16-075 7.40 13.00 5.10 7.60 3.00 0.80 0.50 1 1000PCS
PG16-090 7.40 14.40 5.10 7.60 3.00 0.80 0.50 2 1000PCS
PG16-110 7.40 14.40 5.10 7.60 3.00 0.80 0.50 2 1000PCS
PG16-120 7.40 14.40 5.10 7.60 3.00 0.80 0.50 2 1000PCS
PG16-135 8.90 15.90 5.10 7.60 3.00 0.90 0.60 2 1000PCS
PG16-160 8.90 19.00 5.10 7.60 3.00 0.90 0.60 2 1000PCS
PG16-185 10.70 19.00 5.10 7.60 3.00 0.90 0.60 2 1000PCS
PG16-200 11.20 17.00 5.10 7.60 3.00 0.90 0.60 1 1000PCS
PG16-250 8.90 19.00 5.10 7.60 3.00 0.90 0.60 2 1000PCS
PG16-300 7.10 11.50 5.10 7.60 3.00 1.20 0.80 3 1000PCS
PG16-400 8.90 13.50 5.10 7.60 3.00 1.20 0.80 3 1000PCS
PG16-500 10.50 15.10 5.10 7.60 3.00 1.20 0.80 3 1000PCS
PG16-600 11.00 17.80 5.10 7.60 3.00 1.20 0.80 3 500PCS
PG16-700 11.20 20.20 5.10 7.60 3.00 1.20 0.80 3 500PCS
PG16-800 14.00 22.50 5.10 7.60 3.00 1.20 0.80 3 500PCS
PG16-900 14.00 22.50 5.10 7.60 3.00 1.20 0.80 3 500PCS
PG16-1000 16.50 26.70 5.10 7.60 3.00 1.20 0.80 3 500PCS
PG16-1100 18.00 28.00 5.10 7.60 3.00 1.20 0.80 3 300PCS
PG16-1200 18.00 28.00 5.10 7.60 3.50 1.40 0.80 3 300PCS
PG16-1300 25.00 30.50 10.20 7.60 3.50 1.40 0.80 3 100PCS
PG16-1400 25.00 30.50 10.20 7.60 3.50 1.40 0.80 3 100PCS

Regular Service Condition

1. Operating ambient temperature:-40℃~85℃.
2. Exceeding the applicable conditions of this product or other improper use may cause damage, or even cause electric breakdown or flame.
3. PPTC components are designed for occasional over-current in the circuit and are not recommended for continuous and continuous over current circuits.
4. Avoid contact of PPTC components with chemical solvents. Prolonged contact will damage the performance of the components.

PROSEMI TECHNOLOGY

SEND A MESSAGE

Feel free to fill out our contact form below and our support team will get back to you within 24 hours.